Dyno Results My Review of the ESS VT1 Supercharger Kit
Vital Statistics
  • Vehicle / Motor
  • Dyno Type
  • Dyno Correction
  • Download Dyno Files
  • Boost Log
  • Notes
BMW E9x M3 (S65 Motor)
Dynojet
SAE (J1349)
Download-1
Boost pressure (6.15 PSI) verified with boost log.
Results include 1/2 PSI pulley upgrade.
Configuration / Modifications:
  • ESS Supercharger VT1-535 @ 6.15 PSI Boost
  • Arqray Ti Axle back Exhaust
  • 91 Octane (US), 95 Octane (RON)
  • 6-Speed Manual Transmission
Measured Results:
  • Torque
  • Horsepower
320 FT/LBS
482 HP
@ 6740 RPM
@ 8220 RPM
(433.9 NM)
(488.7 PS)
(44.24 KGM)
(359.4 KW)
Dyno Graphs:
Horsepower, Torque, AFR, and Boost
Other images:
Boost Log Analysis: 6.15 PSI (All Runs Avg.)
 

Car and Modifications:

  • 2008 BMW M3
  • ESS VT1-535 Supercharger
  • 6.15 PSI Boost
  • Arqray Axle-Back Exhaust
  • 6MT
  • 91 Octane

Conditions:

  • Temparature:: 96.04 degrees F
  • Atmospheric pressure: 29.02 inHg
  • Humidity: 13%
  • Elevation:  965 Ft.
  • SAE Correction: 1.039
  • STD Correction:  1.068
  • Uncorrected: 1.000

Results:

  • SAE Corrected: 482whp @ 8220 RPM, 320wtq @ 6740 RPM
  • STD Corrected: 490whp, 326wtq
  • Uncorrected: 464whp, 308wtq

Dyno Database:

Individual Dyno Results:

Individual dyno results are shown below.  SAE corrected results are shown.

The legend below has the following meaning:

  • Dyno Run:  Dyno run file
  • Boost Avg:  Boost calculated using trend line.  This is the "official" boost for this dyno run.
  • Boost Peak:  Peak boost observed on this dyno run.
  • Temp(F) = Temperature (Farenheit)
  • RelH = Relative Humidity
  • Pressure(Hg) = Barometric Pressure
  • DA(ft) = Density Altitude
  • WHP(unc) = Uncorrected wheel horsepower
  • WTQ(unc) = Uncorrected wheel torque
  • WHP(SAEd) = SAE Corrected Horsepower using Dynojet weather station.
  • WTQ(SAEd) = SAE Corrected Torque using Dynojet weather station.

 

Dyno Run Temp(F) RelH Press(Hg) DA(ft) BOOST(avg) BOOST(pk) WHP(unc) WTQ(unc) WHP(SAEd) WTQ(SAEd)
Run_001 93.65 15.0 29.05 4464 5.00 PSI 5.38 PSI 454.1 299.4 470.6 310.3
Run_002 95.10 14.0 29.05 4548 6.65 PSI 7.83 PSI 459.2 303.6 476.3 314.9
Run_003 96.04 13 29.02 4634 6.40 PSI 7.14 PSI 463.8 308.3 481.9 320.3

* Entry used for the Dyno Database