Dyno Results
Vital Statistics
  • Vehicle / Motor
  • Dyno Type
  • Dyno Correction
  • Download Dyno Files
  • Notes
BMW E9x M3 (S65 Motor)
Dynojet
Uncorrected
Download-1
50/50 mix 100/91 Octane gasoline.
Configuration / Modifications:
  • RD Sport 4.6L Stroker Motor
  • RD Sport Underdrive Pulley
  • Akrapovic Evolution Exhaust System (Titanium)
  • 95.5 Octane (US), 100 Octane (RON)
  • 6-Speed Manual Transmission
Measured Results:
  • Torque
  • Horsepower
320 FT/LBS
412 HP
@ 3025 RPM
@ 8045 RPM
(433.9 NM)
(417.7 PS)
(44.24 KGM)
(307.2 KW)
Dyno Graphs:
Videos:
 

Car and Modifications:

  • 2009 BMW M3
  • RD Sport 4.6L "Stroker" Motor
  • Akrapovic Evolution Exhaust
  • 6MT
  • 95.5 Octane

Conditions:

  • Temparature:: 78.07 degrees F
  • Atmospheric pressure: 30.04 inHg
  • Humidity: 25%
  • SAE Correction: 0.979
  • STD Correction:  1.006
  • Uncorrected: 1.000

Results:

  • SAE Corrected: 403whp @ 8045 RPM, 313wtq @ 3025 RPM
  • STD Corrected: 414whp, 322wtq
  • Uncorrected: 412whp, 320wtq

Dyno Database:

Individual Dyno Results:

Individual dyno results are shown below.  SAE corrected results are shown twice, using two different sources.  The first source (SAEd) are the SAE corrected results straight from the Dynojet.  The second source (SAEk) of SAE corrected results are obtained by using the Kestrel 4500 weather station data for each individual dyno run and running it through an independent SAE correction formula.  This ensures that the dyno results are accurate and can be independently audited and verified for authenticity and accuracy.

The legend below has the following meaning:

  • Dyno Run:  Dyno run file
  • Boost Avg:  Boost calculated using trend line.  This is the "official" boost for this dyno run.
  • Boost Peak:  Peak boost observed on this dyno run.
  • Temp(F) = Temperature (Farenheit)
  • RelH = Relative Humidity
  • Pressure(Hg) = Barometric Pressure
  • DA(ft) = Density Altitude
  • WHP(unc) = Uncorrected wheel horsepower
  • WTQ(unc) = Uncorrected wheel torque
  • WHP(SAEd) = SAE Corrected Horsepower using Dynojet weather station.
  • WTQ(SAEd) = SAE Corrected Torque using Dynojet weather station.
  • WHP(SAEk) = SAE Corrected Horsepower using Kestrel 4500 weather station.
  • WTQ(SAEk) = SAE Corrected Torque using Kestrel 4500 weather station.

 

Dyno Run Temp(F) RelH Press(Hg) DA(ft) WHP(unc) WTQ(unc) WHP(SAEd) WTQ(SAEd) WHP(SAEk) WTQ(SAEk)
Run_001 67.6 57.8 29.88 775 404.7 312.1 395.3 304.9 396.5 305.8
Run_002 67.5 58.5 29.88 771 409.7 316.9 401.1 310.3 401.4 310.5
Run_003 67.6 59.9 29.88 768 412.1 320.1 403.4 313.4 404.4 313.8

* Entry used for the Dyno Database