Car and Modifications:

• 2008 BMW M3
• ESS VT1-535 Supercharger
• 5.8 PSI (Average)
• Arqray Titanium Axle-Back Exhaust
• 6MT
• 91 Octane

Conditions:

• Temparature:: 76.43 degrees F
• Atmospheric pressure: 30.04 inHg
• Humidity: 26%
• SAE Correction: 0.979
• STD Correction:  1.004
• Uncorrected: 1.000

Results:

• SAE Corrected: 458whp @ 8400 RPM, 313wtq @ 6990 RPM
• STD Corrected: 470whp, 311wtq
• Uncorrected: 468whp, 310wtq

Dyno Database:

• Dyno files are available from the links below.
• SAE Correction
• STD Correction
• Uncorrected

Individual Dyno Results:

Individual dyno results are shown below.  SAE corrected results are shown twice, using two different sources.  The first source (SAEd) are the SAE corrected results straight from the Dynojet.  The second source (SAEk) of SAE corrected results are obtained by using the Kestrel 4500 weather station data for each individual dyno run and running it through an independent SAE correction formula.  This ensures that the dyno results are accurate and can be independently audited and verified for authenticity and accuracy.

The legend below has the following meaning:

• Dyno Run:  Dyno run file
• Boost Avg:  Boost calculated using trend line.  This is the "official" boost for this dyno run.
• Boost Peak:  Peak boost observed on this dyno run.
• Temp(F) = Temperature (Farenheit)
• RelH = Relative Humidity
• Pressure(Hg) = Barometric Pressure
• DA(ft) = Density Altitude
• WHP(unc) = Uncorrected wheel horsepower
• WTQ(unc) = Uncorrected wheel torque
• WHP(SAEd) = SAE Corrected Horsepower using Dynojet weather station.
• WTQ(SAEd) = SAE Corrected Torque using Dynojet weather station.
• WHP(SAEk) = SAE Corrected Horsepower using Kestrel 4500 weather station.
• WTQ(SAEk) = SAE Corrected Torque using Kestrel 4500 weather station.