Dyno Results
Vital Statistics
  • Vehicle / Motor
  • Dyno Type
  • Dyno Correction
  • Download Dyno Files
  • Boost Log
 BMW E9x M3 (S65 Motor)
Dynojet
SAE (J1349)
Download-1
Boost pressure (8.50 PSI) is not verified. Boost log not available.
Configuration (from Baseline)
  • ESS Supercharger VT2-650 @ 8.50 PSI Boost
  • 200 Cell High-Flow Catalytic Converter
  • Primary CAT Delete
  • Challenge Cross Pipe
  • Meisterschaft GT2
  • 93 Octane (US), 97.5 Octane (RON)
  • Dual Clutch Transmission
Modification (since Baseline)
  • Methanol Injection
Measured Results:
  • Torque
  • Horsepower
 382 FT/LBS
575 HP 		@ 7430 RPM
@ 8225 RPM 		(517.9 NM)
(583.0 PS) 		(52.81 KGM)
(428.8 KW)
Baseline Measurements:
  • Torque
  • Horsepower
 375 FT/LBS
567 HP 		@ 7510 RPM
@ 8140 RPM 		(508.4 NM)
(574.9 PS) 		(51.85 KGM)
(422.8 KW)
Performance Gains:
  • Torque
  • Horsepower
 7 FT/LBS
8 HP 		( 9.5 NM)
( 8.1 PS) 		(0.97 KGM)
( 6.0 KW)
Dyno Graphs:

Car and Modifications:

  • 2012 BMW M3
  • ESS VT2-650 Supercharger kit @ 8.5 PSI Boost
  • Primary CAT Delete
  • High Flow Secondary CAT
  • Challege X-Pipe
  • Meisterschaft GT2 Exhaust
  • 93 Octane
  • 6MT

Conditions:

No Meth:

  • Temparature:: 86.14 degrees F
  • Atmospheric pressure: 29.51 inHg
  • Humidity: 28%
  • Density Altitude:  2701 Ft.
  • SAE Correction: 1.013
  • STD Correction:  1.041
  • Uncorrected: 1.000

Results:

No Meth:

  • SAE Corrected: 567whp @ 8140 RPM, 375wtq @ 7510 RPM
  • STD Corrected: 580whp, 383wtq
  • Uncorrected: 561whp, 370wtq

With Meth:

  • SAE Corrected: 575whp @ 8225 RPM, 382wtq @ 7430 RPM
  • STD Corrected: 587whp, 390wtq
  • Uncorrected: 568whp, 378wtq

Dyno Database:

No Meth:

With Meth:

Individual Dyno Results:

The legend below has the following meaning:

  • Dyno Run:  Dyno run file
  • Timestamp
  • Temp(F) = Temperature (Farenheit)
  • RelH = Relative Humidity
  • Pressure(Hg) = Barometric Pressure
  • DA(ft) = Density Altitude
  • WHP(unc) = Uncorrected wheel horsepower
  • WTQ(unc) = Uncorrected wheel torque
  • WHP(SAEd) = SAE Corrected Horsepower using Dynojet weather station.
  • WTQ(SAEd) = SAE Corrected Torque using Dynojet weather station.

No Meth:

Dyno Run Temp(F) RelH Press(Hg) DA(ft) WHP(unc) WTQ(unc) WHP(SAEd) WTQ(SAEd)
Run_001 86.14 28.0 29.51 2701 560.6 369.6 568.1 374.6
Run_002 87.13 27.0 29.51 2761 559.5 370.4 567.4 375.7
Run_003 87.35 27.0 29.51 2776 553.0 366.0 561.1 371.3

With Meth:

Dyno Run Temp(F) RelH Press(Hg) DA(ft) WHP(unc) WTQ(unc) WHP(SAEd) WTQ(SAEd)
Run_001 87.25 27.0 29.52 2758 551.7 363.5 559.4 368.6
Run_002 85.29 28.0 29.51 2645 567.8 377.6 574.6 382.1
Run_003 86.19 28.0 29.50 2716 562.1 369.8 569.7 374.4

* Entry used for the Dyno Database