Dyno Results Dyno Shootout: Battle between Dinan and RD Sport for 4.6 Liter Stroker Motor Bragging Rights
Vital Statistics
  • Vehicle / Motor
  • Dyno Type
  • Dyno Correction
  • Download Dyno Files
 BMW E9x M3 (S65 Motor)
Dynojet
STP / STD
Download-1
Configuration / Modifications:
  • Dinan 4.6L Stroker Motor
  • Dinan 2-Stage Underdrive Pulley
  • Dinan Throttle Bodies
  • Dinan Stage-2 Intake
  • Akrapovic Evolution Exhaust System (Titanium)
  • 91 Octane (US), 95 Octane (RON)
  • Dual Clutch Transmission
Measured Results:
  • Torque
  • Horsepower
 304 FT/LBS
386 HP 		@ 3990 RPM
@ 8110 RPM 		(412.2 NM)
(391.4 PS) 		(42.03 KGM)
(287.8 KW)
Dyno Graphs:
Comparison with Baseline
Alternate Images:
Dyno, Spark / AFR, Temperatures
Comparison of All Runs (Spark, Throttle Valve, AFR)
Other images:
Conditions for all runs
Carrillo A-Beam Connecting Rod (used by Dinan)

Car and Modifications:

  • 2011 BMW M3
  • Dinan 4.6L Stroker Motor
  • Dinan Underdrive Pulley
  • Dinan Stage-2 Intake
  • Dinan Throttle Bodies
  • Akrapovic Evolution Exhaust
  • 91 Octane
  • DCT

Conditions (Dynojet Weather Station):

  • Temperature:: 68.55 degrees F
  • Atmospheric pressure: 29.92 inHg
  • Humidity: 41%
  • Density Altitude:  787 Ft.
  • SAE Correction: 0.975
  • STD Correction:  1.002
  • Uncorrected: 1.000

Results:

  • SAE Corrected: 375whp @ 8110 RPM, 296wtq @ 3990 RPM
  • STD Corrected: 386whp, 304wtq
  • Uncorrected: 385whp, 304wtq

Dyno Database:

Individual Dyno Results:

Individual dyno results are shown below.  SAE corrected results are shown twice, using two different sources.  The first source (djc) are the SAE corrected results straight from the Dynojet.  The second source (sae) of SAE corrected results are obtained by using the Kestral 4500 weather station data for each individual dyno run and running it through an independent SAE correction formula.  This ensures that the dyno results are accurate and can be independently audited and verified for authenticity and accuracy.

The legend below has the following meaning:

  • Dyno Run:  Dyno run file
  • Timestamp
  • Temp(F) = Temperature (Farenheit)
  • RelH = Relative Humidity
  • Pressure(Hg) = Barometric Pressure
  • DA(ft) = Density Altitude
  • IAT = Intake Air Temperature
  • Oil(F) = Oil Temperature (Farenheit)
  • O2(F) = Water Temperature (Farenheit)
  • WHP(unc) = Uncorrected wheel horsepower
  • WTQ(unc) = Uncorrected wheel torque
  • WHP(SAEd) = Dynojet SAE corrected wheel horsepower (SAE-1340 PRE-2004)
  • WTQ(SAEd) = Dynojet corrected wheel torque (SAE-1349 PRE-2004)
  • WHP(SAEk) = SAE-Adapted wheel horsepower (SAE-1349 2004+)
  • WTQ(SAEk) = SAE-Adapted wheel torque (SAE-1349 2004+)
Dyno Run Timestamp Temp(F) RelH Press(Hg) DA(ft) IAT Oil(F) O2(F) WHP(unc) WTQ(unc) WHP(SAEd) WTQ(SAEd) WHP(SAEk) WTQ(SAEk)
Run_002 09:50:16 67.05 61.30 29.85 783 99.5 206.8 185.7 382.9 301.4 373.4 293.9 375.6 395.6
Run_003 09:51:40 67.30 60.80 29.85 800 99.1 209.8 185.2 384.6 303.1 375.1 295.6 377.4 297.4
Run_004 09:53:49 69.20 58.80 29.85 921 102.4 212.5 185.0 385.0 303.6 375.4 296.0 378.8 298.7

* Entry used for the Dyno Database