Dyno Results Dyno Shootout: Battle between Dinan and RD Sport for 4.6 Liter Stroker Motor Bragging Rights
Vital Statistics
  • Vehicle / Motor
  • Dyno Type
  • Dyno Correction
  • Download Dyno Files
BMW E9x M3 (S65 Motor)
Dynojet
Uncorrected
Download-1
Configuration / Modifications:
  • RD Sport 4.6L Stroker Motor
  • RD Sport Underdrive Pulley
  • Akrapovic Evolution Exhaust System (Titanium)
  • 91 Octane (US), 95 Octane (RON)
  • Dual Clutch Transmission
Measured Results:
  • Torque
  • Horsepower
324 FT/LBS
399 HP
@ 3860 RPM
@ 7700 RPM
(439.3 NM)
(404.5 PS)
(44.79 KGM)
(297.5 KW)
Dyno Graphs:
Comparison with Baseline
Alternate Images:
Dyno, Spark / AFR, Temperatures
Comparison of All Runs (Spark, Throttle Valve, AFR)
Carrillo H-Beam Connecting Rod (used by RD Sport)
Other images:
Conditions for all runs

Car and Modifications:

  • 2009 BMW M3
  • RD Sport 4.6L Stroker Motor
  • RD Sport Underdrive Pulley
  • Akrapovic Evolution Exhaust
  • 91 Octane
  • DCT

Conditions (Dynojet Weather Station):

  • Temperature:: 70.50 degrees F
  • Atmospheric pressure: 29.93 inHg
  • Humidity: 39%
  • Density Altitude:  903 Ft.
  • SAE Correction: 0.977
  • STD Correction:  1.004
  • Uncorrected: 1.000

Results:

  • SAE Corrected: 390whp @ 7700 RPM, 316wtq @ 3860 RPM
  • STD Corrected: 400whp, 325wtq
  • Uncorrected: 399whp, 324wtq

Dyno Database:

Individual Dyno Results:

Individual dyno results are shown below.  SAE corrected results are shown twice, using two different sources.  The first source (djc) are the SAE corrected results straight from the Dynojet.  The second source (sae) of SAE corrected results are obtained by using the Kestral 4500 weather station data for each individual dyno run and running it through an independent SAE correction formula.  This ensures that the dyno results are accurate and can be independently audited and verified for authenticity and accuracy.

The legend below has the following meaning:

  • Dyno Run:  Dyno run file
  • Timestamp
  • Temp(F) = Temperature (Farenheit)
  • RelH = Relative Humidity
  • Pressure(Hg) = Barometric Pressure
  • DA(ft) = Density Altitude
  • IAT = Intake Air Temperature
  • Oil(F) = Oil Temperature (Farenheit)
  • O2(F) = Water Temperature (Farenheit)
  • WHP(unc) = Uncorrected wheel horsepower
  • WTQ(unc) = Uncorrected wheel torque
  • WHP(SAEd) = Dynojet SAE corrected wheel horsepower (SAE-1340 PRE-2004)
  • WTQ(SAEd) = Dynojet corrected wheel torque (SAE-1349 PRE-2004)
  • WHP(SAEk) = SAE-Adapted wheel horsepower (SAE-1349 2004+)
  • WTQ(SAEk) = SAE-Adapted wheel torque (SAE-1349 2004+)
Dyno Run Timestamp Temp(F) RelH Press(Hg) DA(ft) IAT Oil(F) O2(F) WHP(unc) WTQ(unc) WHP(SAEd) WTQ(SAEd) WHP(SAEk) WTQ(SAEk)
Run_001 10:11:27 69.09 62.00 29.84 931 90.3 206.2 187.2 395.2 316.4 385.9 309.0 389.2 311.6
Run_002 10:12:59 69.09 59.30 29.84 929 92.3 209.3 185.2 398.4 322.9 389.1 315.4 392.1 317.8
Run_003 10:15:04 69.30 59.30 29.84 938 93.2 213.6 191.5 398.7 323.6 389.5 316.1 392.5 318.6

* Entry used for the Dyno Database